Sunday, February 12, 2012

How do I clear the service engine soon light on a 98 ford wndstar?

Ford windstar, 1998, 3.8L, 67,000 miles with tuneup done, plugs and wires changed, runs fineHow do I clear the service engine soon light on a 98 ford wndstar?Disconnect the battery for 5 minutes. If it comes back on you have a problem.How do I clear the service engine soon light on a 98 ford wndstar?
There are many components that work together in the engine to maintain optimal engine performance and economy.

A service engine soon, or check engine light indicates that there is a sensor that is reading a condition that is "out of range".

Simply resetting the light does not solve the initial cause of the problem.

Replacing a number of parts trying to troubleshoot the problem in the hopes of getting the light to stay off is a tremendous waste of time and money.

The simplest, and most economical way to alleviate your issue, is to have the computer codes checked by a reputable shop to determine what caused the computer to signal you to begin with.



That being said, if per-chance you feel the need to reset the light in the hopes that it was a "glitch" of some kind, you could disconnect the negative battery terminal for a couple of minutes to clear the check engine light.How do I clear the service engine soon light on a 98 ford wndstar?Drop in to Auto Zone...he will check it, and re-set it free...also tell you what is wrong if anything.

Key word here...

FREE!
You could disconnect the battery to reset the light. I have seen some windstars take up to 3 hours to reset that way. You will also loose your radio and clock memory etc. You could take it to a shop and have them manually reset it. If it comes back on, like I think it will, then you need to have to checked out. Those vehicles are known for having 02 sensor issues. I have also seen it go on from a bad gas cap. Many auto parts stores will scan it at no charge and tell you what codes it is producing. Autozone in NY area is one such store. This way at least, before you turn it off, you will have some idea what caused it in the first place.How do I clear the service engine soon light on a 98 ford wndstar?The light may be on for several hundred reason, tune up does not cover all. Sometimes, if you unhook the battery for 1/2 hour an then hook it back up the codes will clear the compitor and the light will go off. Otherwise, the dealer or repair shop will have to plug into the onboard diagnostics to see what code has the light on and clear it.How do I clear the service engine soon light on a 98 ford wndstar?
It sounds like you need to take it to the dealership to have it done, I not sure what year they started doing it but they made it so that after every tune up or oil change and that the computer chip in the car needs to be updated and the only way to do that is with a piece of equipment that plugs into your lighter.
disconnect the battery cables for a few minutes. reconnect the cables, light should be out.How do I clear the service engine soon light on a 98 ford wndstar?
the computer in your winstar is detecting a failer of a sensor in your van the cheapest way to try and detect which sensor it is .. contact ur parts stores in ur area most have a scanner to read ur computer codes the two best stores to contact is advance auto or auto zone they usally do not charge for this task then they can help you with the part or parts that ur van has to be replaced ........ on most cases it will read bank 1and 2 running to lean which could because of dirty fuel filter or screen in the gas tank or possibly o2 sensors after what has been changed resseting your computer in your van is easily done buy disconntecting your battery for about five - 10 sec.

No comments:

Post a Comment