How do I bleed the clutch in a 1993 ford explorer?

how do I bleed the clutch in a 1993 ford explorer.How do I bleed the clutch in a 1993 ford explorer?to bleed a clutch you need two people,one inside the car(operating the clutch) the other in the engine bay,,,first locate the "slave" cylinder,then find the "bleed screw"on the cylinder,(small nipple shaped 9mm,it should have a plastic cap) remove the cap, then using the correct size spanner loosen the screw 1/4 turn(anticlockwise).,(all through this process you must keep an eye on the fluid level!)top up if necessary....Tell your assistant to press the clutch pedal to the floor and hold the pedal there,(whilst you re tighten the bleed screw) Once the bleed screw is tight,your assistant can release the pedal back up to the top. repeat this action (i.e slacken screw,press pedal,tighten screw,release pedal) until all the air is out of the system and a clean unspluttering jet of clutch fluid comes from the bleed screw.